+44 (0)1202 588900

Order before 3pm on weekdays for Same Day Dispatch

Anti Static Floor/Wall Paint - Electroguard A40 (5 Litre) ESD

Anti Static Floor/Wall Paint - Electroguard A40
A Single Pack Water Based, Static Dissipative Acrylic paint, suitable for floors and walls. It is a high specification method of grounding personnel and preventing static build up at an inexpensive price.
User Friendly
Electroguard A40 is a ready to use, single pack paint that is exremely easy to apply. A thorough stir of a single tin is all that is necessary before the paint is ready to be used on your floors and walls. The paint can be applied by brush or roller and the equipment may be cleaned after use in warm water.
Attractive
Electroguard A40 has excellent chemical resistance, can be easily cleaned and is highly durable. The paint has an attractive satin finish and is available in a range of colours.

Please note we have minimum order quantities of 3 x 5L tins for the following colours, BLUE, RED, GREEN and YELLOW.


Details

How To Apply

H&S Data

Paint Specification

Special Price: £149.50

Regular Price: £169.00  save £19.50

* Required Fields

FREE DELIVERY

ON ORDERS OVER £150

Electroguard A40 is water based and has a low odour. A40 is now available with an Anti Slip finish for floors. Please enquire for further details.

Electrical Properties

Surface Resistance: 10(5)-10(8) Ohms/Square

Resistance to Ground: 10(5)-10(8) Ohms

Conforms to:  IEC 61340-5-1/2

Charge Decay: Conforms to MILB81705C

Two coats are recommended for best results and should be applied over a sound, sealed floor or wall, free from dirt, oil or any loose particles. It is strongly recommended that A40 not be applied over bare surfaces, concrete, wood, tiles, plasterboard etc. Where this occurs a Water Based Primer should be first applied. We advise against applying if the temperature is below 10°C or if the Moisture Content of the concrete surface to be applied over is greater than 15%. Curing times are dependent on temperature, humidity and ventilation.

Simple steps to care for your ESD floor

1. Sweep -The best way to maintain your floor’s static properties is to keep it clean of dirt. Anything that causes a layer on top the the floor is preventing the floor from working properly. Static will also build up quicker on a dirty floor due to the added friction caused by shoes rubbing on dust and dirt. Sweeping the floor regularly using a dry mop will remove dirt and ensure nothing is preventing the floor working to remove static.

2. Protect – make sure that you look after the floor and take action not to damage the surface. Be careful when moving heavy items of furniture/machinery so that you do not scratch the floor. Your painted floor will be able to cope with general foot and vehicle traffic and in the case of Electroguard E30, a polyurethane paint, withstand very heavy traffic wear. Damaged areas should be repainted to ensure no loss of protection.

3. Wash – In the real world, floors will get dirty and your ESD floor can be washed with water and a simple mop and bucket. For harsher stains a cleaner can be used but please ensure it is a neutral ph cleaner. Many commonly used cleaning products leave behind a residue which will act as a sealer to your ESD floor and prevent it working.There are ESD floor cleaners available which include an antistat that attracts moisture from the atmosphere that eliminate static build up. Cleaning with the wrong products can impact the effectiveness of your static floor so please get in touch if you have any questions.

4. Water – whilst we recommend cleaning your floor with water, when sweeping won’t suffice, please do not leave pools of water on the floor surface since it will cause the paint to crack and lift. After washing ensure that any water is removed and the floor allowed to dry. Also remove any spills of oil or corrosive substances as soon as possible.

You may also like...

Please wait...

Continue shopping
View cart & checkout
Continue shopping
View cart & checkout