+44 (0)1202 588900

Order before 3pm on weekdays for Same Day Dispatch

DPF 300 Depanelizer (PCB Nibbler)

Part No 601-250
The DPF 300 is a manual depaneling system designed to solve the needs of depanelizing (PCB Nibbler) small PCB's FR4 type materials and can be used on aluminium substrate PCB's

CLICK HERE for Complex Shapes (Straight Cuts Only)
or HERE for Traditional Shapes
or HERE for Circular Cutting (Special Tooling Required)

DPF 300 Depanelizer

Price: £5,350.00

NEXT DAY DELIVERY

ORDER BEFORE 3PM

DPF 300 is a manual depaneling system designed to solve needs of depanellizing tab routed PCB's

ESD table with EPB 90°, ESD zinc coated steel frontal feet and rear turning wheels with brake Ø80.

Easy Change pcb guides and milling bits for different route widths.

Designed to solve problems due to stress, break or tearing out of PCB’s fibres that often occurs using standard blades or manual tools

The vacuum system allows you to place the system easily and quickly in each working area, without mess.

- Interchangeable guide in hardened and tempered steel. Standard thickness: 1.0 - 3.175mm
- Milling cutters in hard metal with specific geometry for FR4, and aluminium cut. Standard diameters: 1.0 - 3.175mm
- Electrical micro spindle speed: max 24000 rpm.
- Vibrations: < 2,5 m/s2 - Acoustic pressure level : 80db (A), (+/-3db) measured at operator’s site
- Dimensions : 64x 70x 95(H) cm - Weight: 73 kg
- Voltage: 230V/50Hz - power: 0.90Kw
- Depression: 28 kPa (-280 mBar)

- Max PCB’s thickness: max4.0 mm
- Slot length (L): min. 11 mm - Slot width (V): for a standard guide 1.0 - 3,175 mm (tolerance 0 / - 0.02 mm)
- Isthmus distance from components (C): min. 1 mm
- PCB materials: FR4 – ALUMINIUM (for aluminium special milling cutters are needed)
- CE Marked

You may also like...

Please wait...

Continue shopping
View cart & checkout
Continue shopping
View cart & checkout